Looking for a pair of springs, 12 inches long in the 100 to 120 lb/in. range ID 1-7/8ths to 2" max.

Currently have stock polaris red progressive rate springs on the shocks (shocks are plain Podiums from a 2005 predator 500 and the spring rate is said to be #140 on the polaris forums).

They're too stiff. Initial preload eats up the soft part of the progressive rate.

Not sure if a linear spring should be right in at the 140 or lower, but willing to try anything that i can fit in it. (almost getting ready to chop stuff up and make my own set).

thanks