Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 30
  1. Collapse Details
    bajaBrothers Rorty R16 finished (well almost)
    #1
    Senior Member
    Join Date
    Dec 2006
    Location
    Todos Santos Baja Mexico
    Posts
    197
    Default
    Hey guys I am finally done (kinda) with my car. I am just going to post some photos as a recap of the last two years is little bit much for now.
    Here are some specs.
    Rorty R16 frame (some minor modifications ie: smaller window)
    1.5/ .095 mild steel frame
    1.25/ .125 cromo suspension arms
    Honda CRVTEC 2.0 motor
    Rpm FNR gear box 8:1 ratio
    Micro belmont primary clutch
    Team rapid reaction secondary clutch
    Carlisle ultimax xs belt
    2.0 coilover fox piggybacks up front
    2.5 coilover fox piggybacks in rear and 2.5 4 tube bypass in rear
    Kartek (pro am) front hubs with cromo combo stub 2 piston calipers
    Custom Cromo uprights
    Kartek microstub rear hubs w/ 4 piston wilwood calipers
    300m axles 30.5 inches long
    930 cvs race prepped (polished w/ cromo cages)
    PWR radiator w/ 2 fans
    Setrab oil cooler w/ 2 fans
    Custom 17 gal fuel cell w/ bladder and foam
    K&N air filter w/ foam prefilter
    Custom header wrapped in heats heild from Neil @ ATV racing
    Vauxhall electro steer w/ mod box
    Fox steering dampner
    4" Baja design HID
    30" Baja pros on 15" Robby Gordon Beadlocks in front
    33" superdiggers on 15" Robby Gordon Beadlocks in rear
    Parker pumper fresh air system
    PCI 4 link pro intercom
    Icom 55 watt radio
    Custom paint by "Tarzan design"

    Anyway here are some photos
    Thanks for looking
    ________
    Dating advice advice
    Last edited by bajaBrothers; 02-23-2011 at 09:30 PM.
    Reply With Quote
     

  2. Collapse Details
    Go
    #2
    Senior Member
    Join Date
    Dec 2006
    Location
    Todos Santos Baja Mexico
    Posts
    197
    Default
    a couple more
    ________
    GRAPE APE MARIJUANA STRAIN
    Last edited by bajaBrothers; 02-23-2011 at 09:30 PM.
    Reply With Quote
     

  3. Collapse Details
    Go
    #3
    Senior Member
    Join Date
    Dec 2006
    Location
    Todos Santos Baja Mexico
    Posts
    197
    Default
    and some more
    ________
    Alaska Dispensaries
    Last edited by bajaBrothers; 02-23-2011 at 09:31 PM.
    Reply With Quote
     

  4. Collapse Details
    Go
    #4
    Senior Member
    Join Date
    Dec 2006
    Location
    Todos Santos Baja Mexico
    Posts
    197
    Default
    and an action shot
    ________
    Bmw K1200S
    Last edited by bajaBrothers; 02-23-2011 at 09:32 PM.
    Reply With Quote
     

  5. Collapse Details
    Re: bajaBrothers Rorty R16 finished (well almost)
    #5
    Senior Member
    Join Date
    Mar 2007
    Location
    Bakersfield, California
    Posts
    104
    Default
    Wow! Wondered what happened to you Baja- looks like you've been busy! Nice, nice race car you've ended up with!
    Reply With Quote
     

  6. Collapse Details
    Re: bajaBrothers Rorty R16 finished (well almost)
    #6
    Default
    Where's the video?!?!?!
    Reply With Quote
     

  7. Collapse Details
    Re: bajaBrothers Rorty R16 finished (well almost)
    #7
    Millenium Member standfast's Avatar
    Join Date
    Sep 2006
    Location
    New Mexico
    Posts
    1,325
    Default
    Sweet! How's the EPS doing for you?
    Reply With Quote
     

  8. Collapse Details
    Re: bajaBrothers Rorty R16 finished (well almost)
    #8
    Protodie Master and Vendor ProtoDie's Avatar
    Join Date
    May 2005
    Location
    S.W. Michigan
    Posts
    2,717
    Default
    Looks great, nice job
    Reply With Quote
     

  9. Collapse Details
    Re: bajaBrothers Rorty R16 finished (well almost)
    #9
    Admin Gene's Avatar
    Join Date
    Dec 2005
    Location
    Soyo, Angola Africa
    Posts
    6,715
    Default
    Looks like it wants to leap off the ground! Suspension looks comfy!
    Reply With Quote
     

  10. Collapse Details
    Go
    #10
    Senior Member
    Join Date
    Dec 2006
    Location
    Todos Santos Baja Mexico
    Posts
    197
    Default
    Thanks Guys
    I am soo happy to finally see her finished. We have a couple of issues with the motor building too much pressure in the crank and the block I guess does'nt have a pcv valve. So we are installing a crankcase breather setup. Other than that she rips. I'll get some video and post up later in the week. Standfast the EPS system works great, almost to good at full assist and high speeds. The cool thing is you can adjust it or turn it off. We'll see how it holds up. Now we enter the more exciting phase of actually racing the car.
    Thanks for all the help everyone. With out this site I would be stuck with the rotting out skeleton of some chinese POS buggy.
    This site and all its members Rock!!!
    ________
    Vapir Air One
    Last edited by bajaBrothers; 02-23-2011 at 09:32 PM.
    Reply With Quote
     

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Finished Mini frame, Now with X bracing
    By TutTech in forum Projects in Progress
    Replies: 12
    Last Post: 05-03-2009, 05:13 PM
  2. Rorty has a new model ( I think ).
    By Bullnerd in forum Rorty Buggy Group
    Replies: 40
    Last Post: 07-11-2008, 05:47 PM
  3. My finished cuda
    By Azeriksis in forum Show off your toys in here!
    Replies: 31
    Last Post: 04-29-2008, 06:11 PM
  4. BajaBrothers Rorty R16 video
    By bajaBrothers in forum Rorty R16 Shotgun II Two Seater
    Replies: 12
    Last Post: 03-30-2008, 05:49 PM
  5. My first buid: Rorty shotgun
    By SANDiego in forum Rorty Buggy Group
    Replies: 129
    Last Post: 03-27-2008, 09:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •