Ok, I thought I would just show off my 3D model for the buggy I'll be building soon. Still working on details, primarily the drivetrain. I want a street bike engine, but my wife said she has to be able to drive it so that means no clutch. Ideas please.
Let me know what you think of the cage.
Thread: Design Phases 3D model of frame
Results 1 to 10 of 69
-
04-06-2019 01:29 AM
-
04-06-2019 01:34 AM
Some additional screen shots...
-
04-06-2019 03:59 AM
The best option here is the simplest.
Teach her how to shift.
:-)
Sent from my SM-G900V using Tapatalk
-
- Join Date
- Jun 2006
- Location
- Scottsdale, AZ. 10.9 miles from the trailheads
- Posts
- 10,685
04-06-2019 04:00 AM
Chassis looks good but you really need to start with your tires (sizes), then rims (diamond & offset) and work inward to find the inner suspension pivot points then build the chassis to those points.
If you’re gonna start from the ground up, may as well do it correctly.
Start here: https://www.minibuggy.net/forum/suspe...uspension.html
-
04-06-2019 04:02 AM
I would suggest from experience. To make front of the chassis as short as you can and have it work.
The tall stuff up front is kind of difficult to see out of. I know it looks cool on paper. But in reality great out of car visibility it killer.
Sent from my SM-G900V using Tapatalk
-
04-06-2019 03:59 PM
thanks for the suggestions guys. Keep em' coming. I agree that the front of the cage looks cool on paper, And I know what you mean on visibility keeping it as low as possible. I'll see what else I can come up with. No point in asking for advice if I don't take any of it into consideration.
I did start with the desired tire size, thinking 40s would be cool. But that is Freking huge and I'm not going for a rock crawler here. Think trail buggy, some rocks, some sand, some trips beer runs. I settled on 35" tires with 18" rims. I put them on my new design. in these shots I have the suspension maxed out with 3" of ground clearance to spare. I came up with this based on 2 factors. 1.) The tires will deform slightly on a nice landing 2.) the dirt will deform slightly when landing. This guy explains it all.
-
04-10-2019 02:31 AM
ok, my latest buggy design. This would be much harder to build but totally worth it...
-
- Join Date
- Dec 2017
- Posts
- 52
04-10-2019 02:42 AM
Dumb question but what's the difference between red and green tubes on last design?
-
04-10-2019 03:11 AM
no difference other than being better able to tell the difference between upper cage and lower cage.
-
04-10-2019 03:57 AM
I like your revisions.. Looks cool. You could probably do some bigger radius lines and still be cool looking with a bit less difficulty.
If I were modelling this I'd build the front bulk head and then the rear. And then tie them together..
You'll love having this model to come back to for years after building this.
Just recently I've been thinking about the radius tubes myself.
Sent from my SM-G900V using Tapatalk
Similar Threads
-
Help with Frame design
By Wheels in forum FrameReplies: 19Last Post: 03-20-2012, 09:02 AM -
frame design tip (pic)
By pabsy in forum FrameReplies: 5Last Post: 09-16-2011, 09:21 PM -
This Is a Revised Frame Model..Please tell me were I need Improvement
By zklemm in forum MiniBuggy.net Lounge!Replies: 14Last Post: 09-23-2010, 01:55 PM -
Please Take a Look at my Frame Model!!
By zklemm in forum Projects in ProgressReplies: 17Last Post: 09-10-2010, 12:28 PM -
Frame design so far
By wingnut in forum FrameReplies: 11Last Post: 12-31-2007, 10:29 PM
Bookmarks