Results 1 to 1 of 1
  1. Collapse Details
    Tatum Combo Front Hubs/Discs
    Millenium Member standfast's Avatar
    Join Date
    Sep 2006
    New Mexico
    When mating this with the combo spindle, the distance once bearings are installed from the weld face of the spindle and the face of the hub that the rotor bolts to is .59". There is some detail that I obviously didn't feel like drawing like bearings and races but that distance mate is all you really need to set it up. The green faces in the picture with the snout and the hub together shows you the distance mate faces that need to be .59".

    I also attached a file to get dimensions for the front upright plate for caliper mounting. If you use .25" plate you will just need to weld on a .155" shim on the inside (towards centerline of car) of the plate to center the caliper on the rotor. If you have any questions, shoot me a PM.

    This is the brake setup that I have that it is measured off of. Tatum 2 piston, 11" rotor.

    The mate is with the Tweed combo spindles that I posted in the thread just under this one.
    Last edited by standfast; 09-04-2008 at 10:03 AM.
    Reply With Quote

Similar Threads

  1. best wheel/tire combo front and rear for a mini buggy
    By Bulldog in forum Suspension - Wheels & Tires
    Replies: 8
    Last Post: 04-13-2008, 09:41 AM
  2. VW front suspension design
    By LarryW in forum Suspension - Wheels & Tires
    Replies: 3
    Last Post: 06-30-2007, 12:17 AM
  3. Front setup help
    By vpogv in forum Suspension - Wheels & Tires
    Replies: 8
    Last Post: 03-04-2007, 05:31 PM
  4. front a arm rake
    By Boyd in forum Suspension - Wheels & Tires
    Replies: 22
    Last Post: 07-30-2006, 02:35 PM
  5. Street wheel/tire combo for 400 ex front hubs.
    By Montanaminirail in forum Suspension - Wheels & Tires
    Replies: 2
    Last Post: 02-15-2006, 09:11 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts