All Edge Products plans 50% this week!

[nutz4sand]

Mini Sandrail & Off Road Go Kart Parts and Plans

Mini Rail Go Kart Plans

You might be able to get a Piranha in a truck bed. Or might have to get a flatbed truck.

This above buggy can be made to fit inside a fullsize truck bed or on a smaller truck with a custom rack. Its a popular machine to build as well and with a few improvements are a lot of fun. Its also straight forward to build.

I have the booklet Piranha plans and the plans for the DK above. The Piranha plans are a little more detailed but it is a little more complex machine with more parts to build to make it completed VS the DK Panther.

The Panther plans are pretty easy to follow.

[Stomper]

I thought I noticed a link to DXF files for parts on the download page, but after downloading the plans, I can not get back into my account
Yeah, I emailed edge and they said that they will not give out or sell the dxf file for the plate work. I guess you realy can't blame them though. It was worth a try though.

[nutz4sand]

I thought I noticed a link to DXF files for parts on the download page, but after downloading the plans, I can not get back into my account
Yeah, I emailed edge and they said that they will not give out or sell the dxf file for the plate work. I guess you realy can't blame them though. It was worth a try though.

Yes we can! The rest is nearly useless without these plates.

There are so many ways in a hitech shop to copy parts these days hiding the DXF files only hurt the little guy. Most of these little guys are the ones buying the plans anyways.

[Doug Heim]

I have all the plate work available if you need any. it is all professionally done with all the fancy sweeps and such. Just E-mail me at Dheim4@new.rr.com if interested

[wjfawb0]

I thought I noticed a link to DXF files for parts on the download page, but after downloading the plans, I can not get back into my account
Yeah, I emailed edge and they said that they will not give out or sell the dxf file for the plate work. I guess you realy can't blame them though. It was worth a try though.

I noticed the same link and was also locked out after downloading the piranha plans. They got me access after I emailed them, but now my account no longer exists again.

[Stomper]

Were they the dxf files for the plate work

[Mowby]

FYI. I bought the plans a year ago and they had the 'Water mark' on them which actually can be taken off if you know what you are doing. Understandable that they do it (Kind of) but on mine a lot of the dimensions and lines were covered over Hence the reason i took it off. As for the quality/price they were about $100 and most of the pages looked like they were scanned in, bit fuzzy pages offset and twisted but more than good enough to build off(without the watermark) printed out to A3 looked pretty good. As for the dxf, that would be handy. I started drawing up some of the parts but havent got time atm due to other things higher on the list.