PDA

View Full Version : cbr 600 harness



455bird
11-29-2008, 07:21 PM
Do any of you have a break down of a 1999-2000 wire harness. I cut this one like I have every harness and now I cannot get power to the plugs. I do have a book but I must be missing something

455bird
11-30-2008, 09:04 AM
Had a dream last night, I was looking at my wire harness and there is a pink wire coming off the main switch going to the CDI. Do any of you know if this is an anti thief wire that needs a resister installed on it. I know my Yamaha R-1 is this way.

455bird
11-30-2008, 09:05 AM
Oh most if the time the anti thief is in the key switch and i do not have one

455bird
12-01-2008, 06:30 PM
Well i got it running

Gene
12-01-2008, 06:33 PM
Was it the dream that answered your question? What was wrong?

455bird
12-02-2008, 07:20 AM
Like I said I had a dream about this (sucks even when I sleep Iím still working) anyways I put a 480 ohms resistor on the pink wire going to the CDI thinking that it was the anti thief, hooked it all back up and the motor fired up. I donít know what the right ohms is to the CDI but a 480 is what I had at the time left over from when I did my Yamaha motor and it worked.