PDA

View Full Version : Latest Rage Steering rack dimensions



MXman
03-11-2007, 04:25 PM
Can someone help me out with the latest rage rack dimensions. Here is a pic of what I am looking for.

Thanks

http://i45.photobucket.com/albums/f95/bkellerm/center20load.jpg

KWiKSand
03-11-2007, 07:35 PM
Here is what I have. *I am pretty confident that these are right, but if it is critical, I could go measure and make absolute sure.

Rorty
03-11-2007, 07:36 PM
A = 1"
B = 6"
C = 2.25"
D = 2.313"

Ha, we both posted at the the same time, but at least we concur! *[smilie=biggrin.gif]

MXman
03-11-2007, 08:35 PM
Thanks guys.

MXman
03-21-2007, 09:43 PM
Any idea how high the tie rod connection holes are from the upper mounting bolts? Also, what size bolts do the mounts take?

KWiKSand
03-21-2007, 10:27 PM
My model has it at 1.4 from bottom mounting hole to tierod hole, but it could be off a little. * If nobody else posts something definitive, I will try to remember to check tommorow night. *Too late tonight.

KWiKSand
03-21-2007, 10:27 PM
You want a Step or Iges file of what I have?

Rorty
03-21-2007, 10:37 PM
More or less the same. I measure it at 1.476 vertically from the centre of the bottom mounting hole to the tie rod centre. The bottom mounting holes are through holes and .394" diameter and the top two holes are tapped 3/8-16 x .453 deep.

MXman
03-22-2007, 10:18 PM
IGES, step, *or solidworks file would be awesome. *Please email it to bkellerm [at] gmail [dot] com


Thanks

KWiKSand
03-22-2007, 10:44 PM
Step file on its way

Hambone
05-13-2007, 11:43 AM
Hi can any one give me details of a supplier for these rage racks in the Boston area so I can compare prices here in the UK. My wife Christina will be working in Boston within the next couple of months and it may be cheaper buying there than here cheers

Bugpac
05-13-2007, 12:45 PM
hambone, i am most certain someone here would purchase this for you and ship to you, i know i would be more than happy to....

Hambone
05-13-2007, 01:07 PM
That would be great I got a tube notcher sent from a company in the states a few months age and got stung for $190 import duty because it was sent from a company.If it came from a domestic address they would probably not give it a second look.

If you could suss out a price and shipping costs that would be great ( no immediate hurry)the only rack and pinion I have seen so far is for short circuit racing on billiard board smooth circuits.I am sure they are out there but the offroad market is not as big *here as over there, I have to visit a chap a few villages from here (when I can find the time work has taken over at the moment) he builds world rally cars to see if he can direct me to a good off road supplier I also want to see his setup and offer my fabrication services thanks again Sam