PDA

View Full Version : Motorcycle brake parts



nutnbolt2002
01-17-2007, 03:39 PM
I'm looking for a simple way to go from a 10mm banjo fitting to a flex hose then to a steel line. *Any good ideas?

K-fab
01-17-2007, 03:59 PM
So you want a flexible piece between the banjo and a steel line - steel line as in hard line, correct?

Earl's and Russel sell the stuff you need.

You'd be best going with a banjo to a stainless -2 line and then do an adapter from the -2 to the hard line. *The hard line should be 1/8" and is available at most autoparts stores. *It usually comes with male ends.

bdkw1
01-17-2007, 07:38 PM
Brake lines are -3.

Earls makes Banjo to -3 fittings. They also make an adapter fiting that goes from teflon braided to hard line flare fitting.

If you ever need to know a part #, [url=http://www.anplumbing.com/shop/index.php?:3pndgbfv]Go here.[/url:3pndgbfv]