PDA

View Full Version : coils



hotwheels000
05-01-2006, 02:53 PM
Does anybody know if the primary lead from the coil is replaceable. I need to extend the stock ones so they reach the proper plug hole. This is for a 1995 Ninja zx600

I have no other place to locate that would allow the use of a stock primary lead length. This motor is going in a quad

bajatex
05-01-2006, 06:23 PM
The coil wire probably screws on to the coil like the plug cap screws to the wire . It might be tight do to some type of bonding agent. I am not 100% on this so if you screw it up, well you know.

bajatex

hotwheels000
05-02-2006, 08:28 AM
It has a knurled end that looks to be the retainer for the wire at the coil end. I tried to twist it off and it made a small craking sound so I quit. You could be right on the bonding agent.

Does any one have a similar coil that is of no use they would like to experiment with :D

hotwheels000
05-16-2006, 11:36 PM
The caps unsrcewed without breaking on 4 different coils, the wire is removable and replacable. :D

CARLRIDDLE
12-19-2006, 02:41 PM
I have similar motor 94 zx600 and the plug wires for the appear to made to the coil. *Will try the uncrew method. *
P.S. they are ND coils???

matchew
12-19-2006, 04:09 PM
The old school 900rr had coils with screw off leads.