PDA

View Full Version : Yellow Barracuda from Russia (Chydik)



chydik-1234
08-19-2017, 09:35 AM
Hello!!! I collected another buggy Barracuda The engine is mounted from the car of a Russian manufacturer VAZ Front suspension is all according to the drawings. Just under the knuckle I installed the axle from the wheels of the car, bolted on 4 boltek. All the fasteners were cut on a CNC plasma, that the cutting line is not very smooth. Multi-link rear suspension. On hinges. The conventional shock absorbers. did the tube that would set inside the cartridge. Test haven't spent as going left to do the brakes and clutch. Already wound up. It will make the test so throw off here a video from your channel.


http://s018.radikal.ru/i505/1708/49/69edaeb47828.jpg (http://radikal.ru)

http://s019.radikal.ru/i623/1708/55/ad5b3bc04bbf.jpg (http://radikal.ru)

http://s018.radikal.ru/i521/1708/92/8d02760dbda6.jpg (http://radikal.ru)

http://s018.radikal.ru/i503/1708/26/dc806ce6476b.jpg (http://radikal.ru)

http://s013.radikal.ru/i324/1708/31/748760f93972.jpg (http://radikal.ru)

http://s019.radikal.ru/i600/1708/b3/b4f4ca98ebb5.jpg (http://radikal.ru)

http://s019.radikal.ru/i631/1708/dc/cca46889adc9.jpg (http://radikal.ru)

http://s019.radikal.ru/i608/1708/77/93c7f34dcbab.jpg (http://radikal.ru)

http://s014.radikal.ru/i329/1708/0d/e48587719381.jpg (http://radikal.ru)

http://s013.radikal.ru/i322/1708/cb/2b5a24a2bee5.jpg (http://radikal.ru)

http://s018.radikal.ru/i500/1708/ef/3e3047d62e35.jpg (http://radikal.ru)

http://s018.radikal.ru/i501/1708/32/4f7a6c490787.jpg (http://radikal.ru)

http://i013.radikal.ru/1708/a4/e81b0d5a1fd0.jpg (http://radikal.ru)

http://s018.radikal.ru/i504/1708/9a/7f145639eeb1.jpg (http://radikal.ru)

http://s018.radikal.ru/i514/1708/1d/5847cd5ec63d.jpg (http://radikal.ru)

http://s018.radikal.ru/i503/1708/98/c4956ff8e385.jpg (http://radikal.ru)

http://s019.radikal.ru/i603/1708/a3/1402bb9c158f.jpg (http://radikal.ru)

http://s012.radikal.ru/i319/1708/da/dfc242de83bb.jpg (http://radikal.ru)

http://s008.radikal.ru/i304/1708/84/1087d238cfee.jpg (http://radikal.ru)

http://s56.radikal.ru/i154/1708/0a/d275f0281cc2.jpg (http://radikal.ru)

http://s010.radikal.ru/i314/1708/b4/e848091c5e7e.jpg (http://radikal.ru)

http://s61.radikal.ru/i174/1708/e4/ee0a425c2d4f.jpg (http://radikal.ru)

http://s11.radikal.ru/i183/1708/0e/09c3569d9a5d.jpg (http://radikal.ru)

http://s018.radikal.ru/i524/1708/f4/78a2cd333a93.jpg (http://radikal.ru)

http://s018.radikal.ru/i518/1708/93/460610deebbc.jpg (http://radikal.ru)

http://s018.radikal.ru/i505/1708/db/172e77044142.jpg (http://radikal.ru)

http://s019.radikal.ru/i638/1708/f1/cc22427c2306.jpg (http://radikal.ru)

http://s018.radikal.ru/i520/1708/f1/edf0354ee968.jpg (http://radikal.ru)

http://s018.radikal.ru/i513/1708/e5/896062b6f08e.jpg (http://radikal.ru)

Rat4020
08-20-2017, 03:17 PM
Hay very nice work man I like the way ya shoe horned that auto motor in. What's the hp of that motor

chydik-1234
08-20-2017, 04:22 PM
Hay very nice work man I like the way ya shoe horned that auto motor in. What's the hp of that motor


Hi. My translator does not translate this inscription. What's the hp of that motor can you ask what power is this engine? Engine capacity 1500 cm torque 105 Hm

Still I find it difficult to purchase such a steering gear as in drawings and I undone from the steering gearbox from the vehicle. I don't know what kind of shaft length you need to do the center joints was the size, someone tell me what size should be on the hinges???


Here are some photos. have to do brakes and install the seat and weld the exhaust


http://s019.radikal.ru/i617/1708/b6/3dca3f97d3da.jpg (http://radikal.ru)

http://s019.radikal.ru/i603/1708/fe/0c2d998018c3.jpg (http://radikal.ru)

http://s46.radikal.ru/i111/1708/de/67a9e1a18290.jpg (http://radikal.ru)

http://s016.radikal.ru/i337/1708/7a/acfb52a50119.jpg (http://radikal.ru)

http://s019.radikal.ru/i604/1708/26/f3f0c8929ec1.jpg (http://radikal.ru)

http://s019.radikal.ru/i603/1708/f7/7866e16e6c16.jpg (http://radikal.ru)

http://s019.radikal.ru/i644/1708/b9/a2a12861caf7.jpg (http://radikal.ru)

http://s001.radikal.ru/i193/1708/96/6e7664588492.jpg (http://radikal.ru)

http://s013.radikal.ru/i325/1708/08/a75d1d19a6d4.jpg (http://radikal.ru)

http://s013.radikal.ru/i322/1708/80/36b8c86918f1.jpg (http://radikal.ru)

http://s56.radikal.ru/i154/1708/d8/0e9de46da546.jpg (http://radikal.ru)

http://s011.radikal.ru/i316/1708/2d/54a9979f6421.jpg (http://radikal.ru)

http://i056.radikal.ru/1708/05/58ec376886bd.jpg (http://radikal.ru)

http://s018.radikal.ru/i511/1708/e4/dd17b0115cdf.jpg (http://radikal.ru)

http://s016.radikal.ru/i334/1708/e5/28bf1e0021c5.jpg (http://radikal.ru)

http://i066.radikal.ru/1708/fe/dbc08ff319c7.jpg (http://radikal.ru)

http://s008.radikal.ru/i306/1708/38/0d6e953ea6ef.jpg (http://radikal.ru)

http://s008.radikal.ru/i303/1708/47/177cc2fe24ef.jpg (http://radikal.ru)

http://s009.radikal.ru/i309/1708/2e/776319ebccd5.jpg (http://radikal.ru)

http://s015.radikal.ru/i333/1708/19/4d3a90440f71.jpg (http://radikal.ru)

http://s018.radikal.ru/i525/1708/e6/3184963cf8ac.jpg (http://radikal.ru)

http://s018.radikal.ru/i515/1708/2c/4b0f839084af.jpg (http://radikal.ru)

http://s03.radikal.ru/i176/1708/29/514b9ed2c353.jpg (http://radikal.ru)

http://s019.radikal.ru/i619/1708/cc/528e504774f5.jpg (http://radikal.ru)

http://s010.radikal.ru/i311/1708/34/85d395c4c6d6.jpg (http://radikal.ru)

http://s015.radikal.ru/i333/1708/ea/945dfeff852d.jpg (http://radikal.ru)

http://s018.radikal.ru/i525/1708/94/ab333a9bb74d.jpg (http://radikal.ru)

http://s018.radikal.ru/i501/1708/bb/edfd90c93844.jpg (http://radikal.ru)

http://s018.radikal.ru/i517/1708/f7/e8a23d0b4939.jpg (http://radikal.ru)

chydik-1234
08-20-2017, 04:24 PM
I don't know what kind of shaft length you need to do the center joints was the size, someone tell me what size should be on the hinges???

http://s018.radikal.ru/i521/1708/c7/f0d4da948ad4.jpg (http://radikal.ru)

chydik-1234
08-26-2017, 11:48 PM
https://www.youtube.com/watch?v=y_B0Pxo_rIk

chydik-1234
08-31-2017, 07:43 AM
https://youtu.be/OV1jQxT2Hd4

daaboots
08-31-2017, 08:02 PM
Fabulous work!!

chydik-1234
09-05-2017, 07:47 AM
Fabulous work!!


thank