PDA

View Full Version : Rorty custom build



moparbromba
04-02-2017, 10:59 PM
Hey guys bought a mostly complete Rorty custom. going to be posting the remainder of the build here. Not much left to finish besides shocks, bake lines axle shafts and finish wiring then disassemble and paint.

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35595d1491195514-rorty-custom-build-20170402_123241-800x600-.jpg

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35596d1491195518-rorty-custom-build-20170402_123228-800x600-.jpg

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35597d1491195524-rorty-custom-build-20170402_123142-800x600-.jpg

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35598d1491195528-rorty-custom-build-20170402_123136-800x600-.jpg

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35599d1491195534-rorty-custom-build-20170402_123120-800x600-.jpg

moparbromba
04-02-2017, 11:04 PM
buggy is powered by a cbr 954 has RPM FRN gear box 4 wheel discs

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35604d1491196202-rorty-custom-build-20170402_123103-800x600-.jpg

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35605d1491196209-rorty-custom-build-20170402_123112-800x600-.jpg

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35606d1491196212-rorty-custom-build-20170402_123042-800x600-.jpg

http://www.minibuggy.net/forum/attachments/rorty-buggy-group/35607d1491196219-rorty-custom-build-20170402_123034-800x600-.jpg

Beruba
04-03-2017, 02:33 AM
Nice were are you located in BC

moparbromba
04-03-2017, 03:43 AM
Just north of kamloops a couple hours

Buggy Builder
04-03-2017, 02:09 PM
BC is a huge place. A couple of hours in not "just" north in Southern California.

moparbromba
04-03-2017, 04:26 PM
Lol live in 100 mile house B.C

moparbromba
04-03-2017, 04:35 PM
Any suggestions for front calipers? The mounting bracket is 2.5" centre lug mount disc is 9" I believe. The rear has wilwood 4 piston dynalite calipers which came with the buggy but no fronts.

Crisco
08-16-2017, 09:51 PM
Any suggestions for front calipers? The mounting bracket is 2.5" centre lug mount disc is 9" I believe. The rear has wilwood 4 piston dynalite calipers which came with the buggy but no fronts.

That was such a steal! Bob used mostly Wilwood calipers so I would check through their range and see what fits.
I have an account and can give you about 22% off retail if you want. They are shipped direct from CA.