PDA

View Full Version : Badlands ST4 Wheels and Tires



Tyler ST4
11-29-2015, 04:39 PM
Hi there, wondering if anybody knows anything about the ST4 badlands wheel bolt pattern. I did everything by the instructions and stuck close to the plans. I think its 4 x 110 mm but I'm not to sure. anybody have any info on this? if so what did you go with. thanks a ton

tyler

offroad_buggy85
11-30-2015, 09:05 AM
Yes its 4 x 110
Its a pretty common bolt pattern, you shouldnt have any issues finding wheels for it.
The plans design for the wheel hubs are not that large in diameter, so if you were to have a different hole pattern cut out, you'll need to keep it less than ~5.25inches, otherwise make the hub plates a larger diameter.

Tyler ST4
12-07-2015, 08:12 PM
plans call for a 15" rim, will a 14" rim fit? I stuck to the plans for brakes and hub assembly.






Yes its 4 x 110
Its a pretty common bolt pattern, you shouldnt have any issues finding wheels for it.
The plans design for the wheel hubs are not that large in diameter, so if you were to have a different hole pattern cut out, you'll need to keep it less than ~5.25inches, otherwise make the hub plates a larger diameter.

Rat4020
12-11-2015, 06:22 AM
Tyler I moved yer tread from 'For sale '' Too wheels and tires for ya :D

offroad_buggy85
12-11-2015, 07:48 AM
plans call for a 15" rim, will a 14" rim fit? I stuck to the plans for brakes and hub assembly.

Ive been wondering that myself. I believe they will, just need to measure the diameter of your brake rotor plus whatever the caliper adds. I went with a two piston caliper so its a bit bigger, but it may still fit.
based on a quick google search the 14" rim size refers to the outside rim diameter, thus the thickness of the rim itself would take away from the inside diameter. Just a guess, but to be safe your caliper/rotor max diameter should be less then ~13" in order to have clearance.

When i get home I'm going to measure my setup again to check and see. I'll let you know.