PDA

View Full Version : Jig



dcrnbrd
08-17-2015, 04:29 PM
Does anyone have the A arm jig from Badlands for the ST2? Or is there another way to jig theses up that is better for accuracy? Thanks

ErwinBnl
08-25-2015, 04:08 PM
I build mine, it's very easy. Just measure everything up and use small strips to center the thinner rods for the arms.

dcrnbrd
08-26-2015, 12:44 AM
Thanks for the reply. I will be working on those this weekend.

ErwinBnl
08-29-2015, 09:55 AM
There are pictures of my Jig in my topic:
http://www.minibuggy.net/forum/projects-progress/10805-dutchguy-erwin-building-badlands-st2-5.html#post171659

Also, one over here:
http://www.erwinb.nl/images/buggy/erwin_van_den_boogaard_buggy_010.jpg

plkracer
08-29-2015, 02:35 PM
I used 4 pieces of angle iron for my jigs for the st2, but they went with the frame when I sold it. I laced the tube into the angle, which set the distance and kept the two ends parallel.

dcrnbrd
08-30-2015, 01:04 AM
Thanks that helps with my ideas. Its on the table for tomorrow.

sotiris
08-30-2015, 09:51 AM
rear arms

http://i646.photobucket.com/albums/uu185/sotkork/st2%20buggy/11911571_10207440441989981_983506960_n.jpg (http://s646.photobucket.com/user/sotkork/media/st2%20buggy/11911571_10207440441989981_983506960_n.jpg.html)

front

http://i646.photobucket.com/albums/uu185/sotkork/st2%20buggy/IMAG1465_1.jpg (http://s646.photobucket.com/user/sotkork/media/st2%20buggy/IMAG1465_1.jpg.html)

http://i646.photobucket.com/albums/uu185/sotkork/st2%20buggy/IMAG1218.jpg (http://s646.photobucket.com/user/sotkork/media/st2%20buggy/IMAG1218.jpg.html)

dcrnbrd
09-05-2015, 01:46 AM
Very nice
Thanks everyone for the help. Im sure I will have more questions as I get deeper into this.