PDA

View Full Version : 4g93T mivec turbo barracuda



meedo
05-08-2015, 01:12 PM
hi guys . began building this buggy while ago and since motorcycle engine are extremely expensive in my country so i went for the normal Audi 80 whole engine and tranny to be a mid engine setup with power rating of 92 ps . after a while my friend liked the build so he gave me a tuned 4g93t mivec engine with 260 bhp runs on mega-squirt 1
. my question is . does the barracuda frame could hold such weight and power as i`ve already stretched the rear end by 25 cm?
if any one here buggy geeks could send me a pic o some relevant setup would be awesome
also should i switch to trailing arm suspension instead of the regular rear double Arms suspension ?
the engine and tranny weighs around 230 kg .

meedo
05-08-2015, 01:14 PM
seems there is a proplem uploading the pics .
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150314_2158124_zpsdaxjtenh.jpg

meedo
05-08-2015, 01:33 PM
http://www.minibuggy.net/forum/barracuda/http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150314_2158124_zpsdaxjtenh.jpg (http://s1274.photobucket.com/user/meedo10/media/IMG_20150314_2158124_zpsdaxjtenh.jpg.html)http://http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150314_2158124_zpsdaxjtenh.jpg

K-fab
05-08-2015, 04:34 PM
http://i1274.photobucket.com/albums/y437/meedo10/blackwidow001_zps49083677.jpg

http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150314_2158124_zpsdaxjtenh.jpg

http://i1274.photobucket.com/albums/y437/meedo10/20130210_175413_zpse7868588.jpg

When posting from photobucket, right click on the picture and hit "copy image address". Then come back here to your post and use the little icon that looks like an envelope with a mountain on it "insert image". That will pull up a box. Hit ctl-v and that will past the address of the photo into the window. Hit the OK button and it'll post your pix into your thread.

Cool looking buggy, by the way.

meedo
05-09-2015, 08:07 AM
thx
[smilie=peace.gif]

meedo
06-01-2015, 08:31 PM
mitsubishi engine mated to audi transmission
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150531_174836_zpswwgocnle.jpg

meedo
06-01-2015, 08:38 PM
engine fitting first trials . it fits nicely
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150601_203954_zpsonubjcpq.jpg

meedo
06-01-2015, 08:41 PM
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150601_203918_zpsj5obukko.jpg

meedo
06-01-2015, 08:42 PM
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150601_203918_zpsj5obukko.jpg

meedo
06-01-2015, 08:44 PM
the engine and transmission are very heavy would the rear a arms be sufficient or shall i go for trailing arms :confused:

K-fab
06-03-2015, 12:42 AM
Either one can work. Trailing arms are easier to make, but a-arms work really well.

meedo
06-04-2015, 10:46 AM
ok rear a arms she goes

meedo
06-04-2015, 10:51 AM
its a bit big in the rear but some good triangulation would fix it up http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150602_205441_zpspg8cjk8n.jpg

meedo
06-04-2015, 10:53 AM
how it may look like
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150602_213642_zpsimppgzoz.jpg

meedo
06-04-2015, 10:56 AM
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20150602_213728_zpss9vqdtgo.jpg

meedo
11-26-2015, 10:19 PM
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20151111_042845_zpsu056efjh.jpg

meedo
11-26-2015, 10:32 PM
full down flex
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20151111_042853_zpsemnljza1.jpg

meedo
11-26-2015, 10:33 PM
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20151111_052201_zpsg0kcpmvp.jpgtransmission cables and stick done:D

meedo
11-26-2015, 10:36 PM
turbo inter cooler piping done
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20151126_191330_zpsh4wtpvom.jpg

meedo
11-26-2015, 10:40 PM
intercooler http://i1274.photobucket.com/albums/y437/meedo10/IMG_20151126_191354_zpsj91jlzie.jpg

meedo
11-26-2015, 10:44 PM
a shortend and fortified steering rack and petal sets all done
http://i1274.photobucket.com/albums/y437/meedo10/IMG_20151126_191402_zpsdgov3b0g.jpg