PDA

View Full Version : Springs



r6eric
04-04-2015, 08:16 PM
Hi Guys, I need some direction. I have a Bob Rorty R6 with Fox Emulsion Coil-Over Shocks.
Front shock I am currently using;
Front spring
- Top-1200.250.0150
Bottom-1200.250.0150
Rear spring
Top-1200.250.0125
Bottom-1200.250.0200
Front buggy weight-330pds
Rear buggy weight-662 pds.
Am I even close to a good spring set up.
Thank u eric

JD66
04-06-2015, 06:15 PM
I'd work with the guys from downsouth motorsports. In addition to the info above, they will need to know motion ratios and unsprung weights for each corner.

Although if this is a stock setup for the Rorty car, other members may be able to tell you exactly what they are running.