View Full Version : Arctic cat clutch

Up north
03-18-2014, 10:41 AM
I have an arctic cat clutch from a '96 zr 580, it's diameter is 11" it fits 1" shaft with 1/4" keyway. This isn't a roller clutch. This clutch has a yellow spring and very few miles on new sheave bushings and helix sliders. Also have the jack shaft from the sled with the pillow bearing halves and hardware to bolt clutch on. You pay shipping.
Sorry for the shitty cell phone pics, can get better pics if needed

Up north
03-18-2014, 10:51 AM
Top down

03-19-2014, 07:52 PM
Would this work on my 16HP V-twin Vanguard?
Its a 1 inch shaft with 1/4 keyway.
I still need to learn more about CVT's.

Up north
03-19-2014, 08:35 PM
This is the driven clutch. It would either go on an fnr or jack shaft. You need to purchase a drive clutch with 1" shaft. Mixing and matching clutches can be tricky but can be done.

03-19-2014, 08:44 PM
Ok Thanks, I'll keep you posted

Up north
03-19-2014, 09:06 PM
Ok Thanks, I'll keep you posted

Sounds good, let me know

12-31-2014, 01:00 AM
still have this?
do you have the drive clutch too?

Up north
01-02-2015, 01:03 AM
NEbuggy- pm sent

Up north
05-29-2015, 03:09 AM
Still available fellas. Someone must need a free clutch!? I hate to throw stuff away that can help someone get their buggy going.

05-30-2015, 07:14 PM
I'm pretty sure this is the clutch I need for my Apex now Nytro (apex won't fit) swap in my single seater. Let me check with Rat really quick. I can PayPal you for it and the shipping. I'd like to give you something for it.

Up north
05-31-2015, 02:37 AM
Sorry Flyer, this isn't the roller secondary everyone is wanting for their rides. This one has plastic helix "sliders" no good for high hp applications

Up north
05-31-2015, 02:39 AM
This clutch is gone fellas