PDA

View Full Version : Polaris FNRL



Up north
08-14-2013, 09:52 PM
I have a polaris trail boss F/N/R and low range cvt trans out of a 90's machine. Not sure the condition of seals or bearings but it does shift into each gear. Has been sitting in my garage for 5-6 years. Also have axle, hubs, bearing carrier and sprocket hub as well from the same machine. I have the cvt clutch for the trans as well but it is in bad shape. I'm cleaning house and want it gone.... If you want it it's yours

Rat4020
08-15-2013, 05:37 AM
Were ya located in MN

Up north
08-15-2013, 06:04 AM
I live in Bemidji

Rat4020
08-15-2013, 06:11 AM
Cool I get up around Hachensack not too far there .About a half doz times a year fishin and ridin the buggy in the Chipauwa nat forest.

Up north
08-15-2013, 06:39 AM
Hackensack is a happening little place in the summer for sure. What lakes do you fish? Lol this prob not the right spot for chit chat within this forum is it? I'm new here

Rat4020
08-15-2013, 07:49 AM
Hackensack is a happening little place in the summer for sure. What lakes do you fish? Lol this prob not the right spot for chit chat within this forum is it? I'm new here

Pleasent LK . I think its ok ta Hyjack yer own tread LOL

Up north
08-15-2013, 08:09 AM
Lol. Ok I'm still learning the rules

Duane
08-15-2013, 09:15 AM
You started the thread you make the rules! We can participate or not. What's a Bemidji?

Rat4020
08-15-2013, 09:21 AM
You started the thread you make the rules! We can participate or not. What's a Bemidji?

Its the home town of Paul Bunyan and Babe the Blue OX :D About 200 miles north of Mpls St Paul MN

Up north
08-15-2013, 09:22 AM
Lots to do in bemidji. If your outdoorsy you will never be bored. 10,000 lakes and miles of back roads to play on. Unfortunately not much for work here. Very tourist driven economy. I love it here

Up north
08-15-2013, 09:29 AM
Oh and it's the start of the Mississippi River. Headwaters I think is what it's called

anatram
08-15-2013, 10:37 AM
will you ship to 77536?

Up north
08-15-2013, 10:45 AM
anatram, my employer sent me to Houston tx for training. When I get back to Minnesota I will check on the shipping cost.

mech_head6
08-15-2013, 10:59 AM
We used this box for about a year or so. They work great combined with the front spool that came in those quads. It makes a nice little chain drive independent rear setup.

I wouldn't recommend them for anything over say 50 hp. The weakest link is the case, the mounting points are not real strong. Just my thoughts.

I hope somebody takes advantage of his great Minnesotan offer!

Up north
08-15-2013, 11:04 AM
What are you referring to as the front spool? I salvaged all the chain drive 4x4 components when I stripped machine

mech_head6
08-15-2013, 01:27 PM
When we put together the drive train for our buggy we used the front chain drive differential (spool) in the rear and did not use the rear drive components. We used a single sprocket to drive the front differential, in the rear.

I realize now that they didn't always use the eccentric housing shown below and that may be a different model than what you disassembled.

I can't seem to find the pics right now (maybe the links crashed?) in our build thread:
http://www.minibuggy.net/forum/projects-progress/13946-redesign-baja-sae-champion-vehicle-3.html

So I'll just include some pictures.

Polaris Micro fiche:

http://db.tt/SMFxFrsa

Notice the items with arrows, the eccentric housing (9) and the eccentric 'hub' I guess (7). There is a shaft that goes through there and has a CV attached to both sides, as well as a sprocket (chain from trans).

http://db.tt/KxBE1Nu7

Here is a quick cross reference of the models that utilize the eccentric housing (9).

Up north
08-15-2013, 01:41 PM
I see what you did. Was what I was thinking of using for the spool too which is why i kept it. Kept the rear axle because i didnt understand cv axles, plunge and stubs then. Didnt know which direction to take then. Never started a project with these parts and that's why they have been sitting. I'm currently building a two seater and this stuff is too light. I hope shipping is feasible and I can get this stuff to anatram. If not get it to someone who can use it.

chuckorlando
08-25-2013, 05:49 AM
That trans, if anything like the rest of them, will hold bout 2x that 50hp. Hell a basic race mod is 70-80hp. Thats not even a drag mod