View Full Version : Video of The Rorty R-16 Shotgun Gopro HERO 3

05-06-2013, 08:59 PM
I was playing around with my new Gopro Hero 3 and made a video of a quick buggy run in the desert by the house. Some of you will remember this buggy built by "Standfast" a few years back. It has gone through a ton of upgrades recently and is a really sound rig.


05-06-2013, 09:32 PM
Pretty cool.

How about some recent pics?

05-06-2013, 10:30 PM
Here are some recent pics. Newest upgrades are as follows: Power steering, 31x10.50 General Grabbers, Radflo 2.5 remote res shocks (FOAs would not stop leaking) and new raised upper mounts, race radio added to intercom, and I just gotrid of the Comet 108 4-Pro and mounted a Micro Belmont 8.5" 4 arm Pimary clutch but dont have pics of that yet. Solved the belt slip issue finally.

05-06-2013, 11:35 PM


05-06-2013, 11:37 PM
Paste the direct code in the http://i84.photobucket.com/albums/k5/chikin1974/Final%20suspension%20dwarf%20car%20conversion/A9656D6F-73A0-4BF3-9C6E-12D423F35139-1433-00000189AD2C8217.jpg and it will post the pic in the thread like I did above.
Makes it simple

05-07-2013, 10:12 AM
Thanks. Definitely better that way.

05-07-2013, 04:40 PM
I like the paint job. I have since heard a lot of leaking issues with those FOA shocks. I bought them for that car when FOA just got started. How do you like the Radflows? Cool to see that the car somehow made it back to NM.

05-07-2013, 06:19 PM
Sweet. Do you have some kinda limited slip rear differential to be able to drive it on the road?

05-07-2013, 08:28 PM
Very cool!

Nice job.

05-10-2013, 01:32 PM
Standfast, The Radflos are great, valving is stiffer but better for the occasional race. I paid just under 2k for the set of four radflos but the bodies are longer than the FOAs at the same stroke. I had to raise the upper shock mounts a bit. I was able to sell the FOAs on Ebay for 1/2 of new price, not bad. I must recommend the Superatv Power Steering, it absolutely cured all the feedback woes that this rig had and you can drive with your pinky. I paid @$600 for it on their website. I just adapted the brackets that came with the kit to mount to the frame of the buggy.

05-10-2013, 01:36 PM
@grossgraphics, the RPM FNR is a solid live rear, no slip at all. The buggy doesnt want to turn on the street, but I just power through it and it squaks plenty.

05-14-2013, 04:42 PM
Dang, that looks cool!! I recently dug up some pics of this car from back ~08 or so when we first took it out. There are also a few videos of it on youtube from back then.

Looks great!

05-15-2013, 01:32 PM
Must be nice having testing grounds so close to home! Great Car and Video.

Looks to me like if the front coilovers Valving could have a bit faster Rebound. So the Tires would keep better contact to the ground. If you do a drive by video, then watch it in SlowMo going through the whoops and zoom in on the front, you can see exactly what its doing. I like the wheel to fall at close to the Speed of Gravity, too slow and the front tires are jumping over the whoops not keeping good contact.

05-25-2013, 01:54 AM
Awesome awesome video and pics!!! seriously cool machine!!