PDA

View Full Version : Shifting help!



Teoz
02-16-2012, 01:50 PM
I'm building my badlands St2 long travel il be posting pics soon Ive got the motor mounted but I'm trying to figure out how to do a shift linkage can somebody post some pics of theres so i can get an idea? people are telling me the linkage is hard then others are saying it's simple !

evan
02-16-2012, 02:53 PM
Look into using a morse cable. Then it's very easy. Just cut down a stock shifter and drill a hole for a hiem. Anchor the cable on both ends and make any shape shifter. Then you can just trial/error test fit mounting location of shift level attachment.

Deranged
02-16-2012, 02:58 PM
Here is my set up. It is a morse cable set up, pushing, and pulling a bell crank lever to push up and down on the bike shifter.

Hope this helps.

Teoz
02-16-2012, 05:21 PM
Look into using a morse cable. Then it's very easy. Just cut down a stock shifter and drill a hole for a hiem. Anchor the cable on both ends and make any shape shifter. Then you can just trial/error test fit mounting location of shift level attachment.

do you know any good places i can pickup some morse cable?

Glock n Ballz
02-16-2012, 05:26 PM
Bought mine from Proto die. Big too. 1/4 inch. Cant get that at Jegs!

zuverinb
02-16-2012, 06:09 PM
do you know any good places i can pickup some morse cable?

I bought mine from Auto Value.

evan
02-16-2012, 06:45 PM
Hd Throttle Cable,6 Foot | Sand Parts - Sand Rail and Dune Buggy Parts (http://www.sandparts.com/servlet/the-9192/sand-rail-dune-mini/Detail) and support a site sponsor

Deranged
02-16-2012, 07:23 PM
Just make sure it is a 1/4" cable...trust me, I went through 2, 3/16" cables. Jody (Protodie) has all this stuff for you.

Justin

Teoz
02-17-2012, 12:53 PM
Bought mine from Proto die. Big too. 1/4 inch. Cant get that at Jegs!

hey glock how long roughly should i get the cable?