PDA

View Full Version : New Part: Spindle for your Front End



sandparts.com
07-04-2011, 12:03 PM
My supplier has had this new part in the works for over 2 years.. Well the wait is finally over. Combo Spindle for A-arm front end cars. These are over kill for a light weight Mini buggy, but they will take a lot of work out of your build process.

First Set sold will get a HUGE discount with the agreement that the Buyer Posts pics and a product review. Email me directly for discount Code. sandparts@gmail.com
A-Arm Conversion Combo Spindles Pair Left and Right (http://www.sandparts.com/servlet/the-1614/A-dsh-Arm-Conversion-Combo-Spindles/Detail)
http://www.sandparts.com/media/03/a20791b130ed53e9cc2c7c_l.JPG

Stomper
07-04-2011, 01:11 PM
Those are sweet. What is the material thickness.

sandparts.com
07-04-2011, 01:38 PM
It looks like .25 thick. I dont' have a caliper or even a tape measure handy.

jwik
07-12-2011, 07:58 AM
wow those do look nice wonder what hubs they will accept?

bdkw1
07-12-2011, 10:50 AM
wow those do look nice wonder what hubs they will accept?

Any VW combo spindle hub will fit them. You will be stuck with the wide 5 pattern, but there are plenty of hub choices out there.

TutTech
07-12-2011, 10:52 AM
All kinds of hubs work on the combo spindles set up to go to VW large 5 lug.
Tatum, ProAm, Empi sheesh and many more have hubs and brakes that work on them.
You just have to let them know that you have combo spindles.

Then you can always find hubs and get bearings to match up to the hubs and the spindles also.
Again just a matter of matching them both up and the hubs have enough room for the combo spud size and then room for a bearing to fit into the hub.

But off the shelf lots for VW 5 lug hubs to match up.
:)

ha ha.. bdkw1 posted at the same time.
;)

sandparts.com
07-14-2011, 12:07 AM
I can also order these with a 2" hollow spindle. If you have a full size rail or if you are especially CRAZY!!!

I can get the 5 wide hubs with or with our brakes.

Sandparts

ihcj9
07-26-2011, 04:16 PM
Does anyone have the dimensions of the spindle itself? I need to see if I can fit an ATV hub on it by sourcing the correct size bearings to fit both.

sandparts.com
07-26-2011, 06:10 PM
hmm. This is a combo spindle spud.
Diameter of Spud for Inside Bearing is 1.25"
Diameter of Spud for Outter Bearing is 1.00"
I used a digital caliper to get the measurements.

sandparts.com
07-26-2011, 10:19 PM
I have both brake and no brake hubs that will go to a 5 lug vw pattern. I can also get you a 4 lug vw pattern hub that you will have to machine out to accept the Combo Spindle.

bighead
07-28-2011, 01:03 AM
How much is this set?