View Full Version : Brake line adapters to banjo bolts

03-25-2009, 02:20 PM
I was reading the thread on brake lines, you guys posted some very helpful sites I can order everything I need it looks like but does any one know what kind of banjo I will need to go over the bolts I have that go to the calipers I have. In the front I have raptor 660 brake calipers and in the rear I have a single Honda shadow 650 motorcycle caliper. I have the bolts for them I just have to find the banjos for them. I also have a hand brake for the front brakes that I made from a foot brake from the donor bike it was a 1000 suzuki gsxr. Any help would be appreciated. [smilie=ecstatic.gi:[smilie=bs_help.gif]

03-25-2009, 02:38 PM
Im gonna guess it is 10mm, what size is the bolt.. It is definitely metric...

03-25-2009, 02:46 PM
You should be able to measure the bolts. That will indicate what size banjo you need.

Here are a few links for you...this is -3 hose to 10mm banjo

Earl's Performance 600803ERL - Earl's Performance Speed-Seal Hose Ends (http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR%2D600803ERL&N=700+400041+303305+115&autoview=sku)

Earl's Performance 600703ERL - Earl's Performance Speed-Seal Hose Ends (http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR%2D600703ERL&N=700+400041+303305+115&autoview=sku)

Full list of 10 mm banjo

hope this gets you started:D