|
|
#1 (permalink) |
|
Dual Sport Buggy
$15,000.00 The specs on the buggy: Buggy is 12 feet 6 inches long from rear bumper to front bumper. It has a 100 inch wheel base with coil over shocks no torsions for its suspension. The front end width is 72 inches wide to the outside of tires. The rear width is 76 inches wide to the outside of the tires. Making the buggy totally easy to load into just about Tailer. Engine & Suspension: 11 gallon tank, *New 1835cc VW Engine with a single Empi carb. 002 Bus Tranny, with super diff & good ring & pinion 930 CV's, Chromoly Axels, 930 Micro Stubs, 4 piston disc brakes 17.5 inches of Rear wheel travel with 2” Fox coil over’s & Fox 2” dual bypass shocks. 16.5 inches of front wheel travel with 2” Fox coil over’s. Some Information on the buggy: The buggy is about having fun and being safe & it does just that. It is very stable, dependable, & built with off the shelf parts. It was built based off my race car. My race car has proven itself racing at MORE Placing 2nd in points for the entire year. The buggies design & suspension allows it to run through whoops & rough sections easily. The width & wheel base of the buggy makes it stable, easy to control and easy to drive. The buggy comes fully Powder Coated, with seats, seatbelts, fox shocks, wheels, tires, cv’s, axels, tail lights, headlights, steering, rear micro stubs, cnc pedals, rear brakes & axels, Motor, tranny, everything seen here is included. The Buggy runs and drives so come take a ride and see what you think. You'll love it! Also I can lower the price more if you want just the frame and no motor an tranny that way you can drop in a motorcycle or other motor. $11,500.00 as a complete car less motor and tranny. Thank you, Tut Cote' (909)224-4127 Last edited by TutTech; 08-26-2008 at 09:43 PM. |
|
|
|
|
| Sponsored Links | |
|
|
#2 (permalink) |
|
The pictures don't do it justice. It looks amazing in person.
It's small enough to run trails with atv's and SxS's yet big enough to run with full size cars. Those of you considering buying something should really give this one a chance. |
|
|
|
|
|
|
#4 (permalink) |
|
Sure you got it.
I hope after I take off this weekend and get back from doing a Jeep run I will be able to mount up the rims and tires and roll it out of the garage and get some real pics of it. I will do just that and take some pics next to it and a maybe some other stuff for scale etc. Thanks for the kind words and input. As soon as I can I will get back to you with the pics. ![]() |
|
|
|
|
|
|
#5 (permalink) |
|
Some new pics.
Heres a shot with me inside to show head room and cab size. ![]() one more shot with me outside showing the car. Remember I am a 6 foot tall guy and with my hat 6'2" tall and weigh over 200 pounds. And I fit in this car easily. ![]() other side ![]() Motor ![]() floor ![]() front ![]() Thanks for looking and if you have any questions just ask. or PM me ![]() |
|
|
|
|
| Sponsored Links | ||
|
|
||
|
|
#7 (permalink) |
|
I have the motor now.
Its brand new 1835cc motor. I dont have the distributer and plugs etc. Just need the clutch etc for it and then wiring for the car. Thats it. But the car is available as a roller right now. Or as a finished car and I can finish it for you. Take a look and let me know. You can see more pics etc here. http://z11.invisionfree.com/Tut_Tech_Ra ... hp?act=idx Thanks for looking. ![]() |
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|
| Sponsored Links | ||
|
|