Custom Build MINI Buggy.

[Shakey]

Labas . Labai gerai!

[Binze]

Originally Posted by Shakey

Labas . Labai gerai!

dar Lietuviu atsiranda sitame puslapyje? Mazas pasaulis

[Binze]

Originally Posted by Gene

Many chain driven cars have a bearing carrier with a sprocket on one side of the carrier and a disc brake on the other side of the carrier. Typically the carrier is a tube machined at either end to carry a bearing. A shaft passes through the bearing and the sprocket is on one side of the tube and the disc on the other side of the tube.

Your english is very good. We know what you are saying!

this is bad what i did? the joint end moves from bearings on the end

[LEE1969GB]

Originally Posted by Shakey

Labas . Labai gerai!

Yes every time
Gene what did you mean, were you saying put in a Jack shaft? It will work as it is if he gets the sprockets in line won,t it. not sure about the shafts sliding in the bearings, what kind of cv is it a plungeing or non plunging?

[Binze]

Originally Posted by LEE1969GB

Yes every time
Gene what did you mean, were you saying put in a Jack shaft? It will work as it is if he gets the sprockets in line won,t it. not sure about the shafts sliding in the bearings, what kind of cv is it a plungeing or non plunging?

it is not sliding from bearing, it slides from joint (its BMW car joint)

[Binze]

see? it sliding from the joint, and the bearing allow the joint move higher

[LEE1969GB]

I see, the bearing at the end is a self aligning bearing, thats what I could not understand.

[Binze]

Originally Posted by LEE1969GB

I see, the bearing at the end is a self aligning bearing, thats what I could not understand.

I think i need MUCH modification on rear suspension, right?

[Gene]

It is not ideal but not horrible. Similar to very early VW bug with swingaxle.

Can you post a drawing of how you plan to connect the chain to drive the axle?

[Binze]

i get some stock exhaust pipes, and it runs MUCH better than car exhaust