LIL Monster buildup!

[whiplash]

Thanks for the tips! Yeah micros would be nice but WHEW $$$! for them baby's! If I can get 18 I'll be stoked, so I hope so....Yes 930's race style "loose"...

[whiplash]

Here it is!! I hope to God its straight! first time ever doing a sheet metal boxed type anything!.......Just need to touch up a few small areas I could not reach after it comes out of the jig...Then on to the next one!

[whiplash]

More progress!! I am killing myself here, but it seems to be paying off!! Both arms are done and I am starting to mock everything up! So far BEFORE cutting the stock bump out I have almost 16" of travel with no clicking and 26* max angle.

[whiplash]

Do you guys see any reason I can't just weld these up right here, I bought the cheap kit and it seems like the heim plates are a bit too short for the big arms...

[Gene]

Weld it!

[whiplash]

LOL! Thanks Gene!

[whiplash]

Sweet I found a new smiley!!

[millbilly]

I think I would tack it and have it checked for alinement. Easier to change it now than later, less grinding

[whiplash]

I plan on doing my own alignment, I have done many a car for street and off road in the past, not really that hard...But good idea..

[whiplash]

Well, I got it setup, toe is as close to zero as I can get it for now without having the car on the ground, I may add a bit of toe in for stability if it needs it later....but on to the pics! Oh yeah, did I mention it cycles over 18" of USABLE travel as it sits with about 3-4" of ground clearance in full bump!!!!!!! WooHoo!