2007 R1 Fuel Pressure??????

[stetler]

Guy's I need some more input on this please.
I am installing my 07 R1 motor in my Rhino and I'm running the fuel system thru a 16 gallon fuel cell. I have to buy a high pressure fuel pump and regulator.

Can somebody tell me what size fuel pump I need to use?
Also what should the fuel pressure be at so I can set the regulator?

My motor is stock but with Graves exhaust and a PCIII.

Thanks!!

[punkur67]

Your motor should havs a regulator on it. I ran a bosch pump straight to the reg and that was it. I thin the pump is rated at 95 psi.

[stetler]

Originally Posted by punkur67

Your motor should havs a regulator on it. I ran a bosch pump straight to the reg and that was it. I thin the pump is rated at 95 psi.

Well that is good news about the regulator. How can I be 100% sure that it already has one on it? What does it look like?
Is your motor a 07?
Thanks

[punkur67]

Mine is an 03. The regulator is on the end of the fuel rail and should be where you hook up the fuel in at. It is circled in red here.

[yummi]

Let me know if you find a good price on the bosch pump. I need one. I found 200.00 at outfront. Dont know if that is good or bad.

[stetler]

Originally Posted by yummi

Let me know if you find a good price on the bosch pump. I need one. I found 200.00 at outfront. Dont know if that is good or bad.

You got it! Once I buy one I'll let you know what I got and how much.

[punkur67]

I paid $220 for my bosch pump. That was the best I could find around here. MAKE SHURE youuse a good filter before the pump. It does not take much to plug those things up. I have 2 buddies that pluged theirs up.

[455bird]

go to auto zone pick up a bosh for under a 100, i will see if i can find the part number but give me a day or two i'm on 12's at work. your pressure reg. will work fine. do you run a stock dash? if so i also know how to make the low fuel light go out. let me know

[stetler]

Originally Posted by 455bird

go to auto zone pick up a bosh for under a 100, i will see if i can find the part number but give me a day or two i'm on 12's at work. your pressure reg. will work fine. do you run a stock dash? if so i also know how to make the low fuel light go out. let me know

Yes I am going to be running the stock dash cluster.

[yoshi]

Originally Posted by punkur67

Your motor should havs a regulator on it. I ran a bosch pump straight to the reg and that was it. I thin the pump is rated at 95 psi.

That sounds awfully high. A busa runs around 43 psi stock, and on my big motor kits I bump that up to 58 psi...