Civic Radiator Shrouds

[RickS.]

Here's the shroud I've come up with for mounting the Civic radiator fans.
This shroud will fit the aftermarket Civic aluminum radiators sold on Ebay.
This is the dual core 16.5" x 14.25" x 2" with 12" fan.
It can be mounted on either side of the rad.
I only made 3 and these are all spoken for. I will make more if there is any interest. I also make the rubber isolator bushings for these radiators.
Civic 92-00 2 Row Aluminum Radiator+12" Fan EG EK MT DX:eBay Motors (item 200371285783 end time Nov-05-09 12:26:24 PST)



There's approx. 15/16" clearance between the coling fins and the fan's base.

It also has an edge seal along the top and bottom.

I drill the side plates and add #10-32 threaded A-T insert nuts for mounting. This must be done very carefully. you can easily puncture the core if you drill too deep.

[wyattboche]

How much for the shroud? Also does it include the fan?

[odypilots]

I'd like one, Rick.

[RickS.]

pm me for a price.

Self tapping screws may also work to attach the shroud.
Or I may do a kit that would include the insert nuts and instalation tool.

The fans can be purchased seperate from the same Ebay seller as the radiator.
12" 1550 CFM Slim / Thin 12V Radiator Cooling Fan:eBay Motors (item 200396779715 end time Oct-25-09 14:31:30 PDT)

[Bullnerd]

The last pic looks like there is a crack in the alum.?

[RickS.]

Where? I don't see it.

[Bullnerd]

Very nice work BTW as usual.

Its probably nothing but...

[ttginc]

It looks like the edge of an underlying weld to me. Anyway, really nice work Rick. Those fans and radiators don't look too expensive either.

[Doug Heim]

I just picked up 2 of these. Nice, Thanks

[odypilots]

I wanted one to rig up the plastic radiator cover that Honda puts in front of the stock set up on the Pilot. When I mentioned this to Rick, he didn't care for the rig up part and had me make some measurements of the part. A week later I had a shroud that fit the cover like it was made for it. Oh yeah, it was! Thanks Rick.