Results 1 to 6 of 6
  1. Collapse Details
    Barracuda - Superlite - CBR1000F
    #1
    Junior Member
    Join Date
    May 2017
    Location
    Southern Highlands NSW Australia
    Posts
    6
    Default
    G'Day Everyone,

    This is my first full build from scratch, I had success with two previous builds but they were partly done.

    I purchased a Barracuda chassis / frame with a CBR1000F fitted all mounted on a rotisserie.

    A set of plans came with the frame which has the PIRCV plans as well, at this point in time not sure which of the Egde rear drive it will be or maybe MX5 lsd modified hatted diff centre.

    I have been comparing Edge front & rear uprights as opposed to custom / ex Mazda MX5 or Miata ( depends on where in the world you are ).

    Unsprung weight with the Mazda gear won't be an issue as I have no intentions of racing ( possible motokharna , short track rally or something ) nothing too serious.

    My intention is to run 4 wheel disc set up with maybe with the mazda 4 x 100 stud pattern.

    The MX5 CV / axle running gear seems pretty robust.

    Any advice, criticism or help would be greatly appreciated.

    cheers
    Chris
    Southern Highlands
    N.S.W Australia
    Attached Images Attached Images
    Reply With Quote
     

  2. Collapse Details
    Re: Barracuda - Superlite - CBR1000F
    #2
    Intense Moderator Rat4020's Avatar
    Join Date
    Oct 2009
    Location
    Cold Spring MN ...Dunz season's ust around the corner
    Posts
    4,018
    Default
    Welcome to MiniBuggy looks like yer off to a great start .. Picts Picts Picts LOL
    The question is not if its gona roll. Its when ..

    That be some kind of church cruzzer or commuter bike thingy ?
    Reply With Quote
     

  3. Collapse Details
    Re: Barracuda - Superlite - CBR1000F
    #3
    Junior Member
    Join Date
    May 2017
    Location
    Southern Highlands NSW Australia
    Posts
    6
    Default
    G'Day Rat...thanks for the welcome ! Will take as many pics as possible & post them.

    cheers
    Chris
    Reply With Quote
     

  4. Collapse Details
    Re: Barracuda - Superlite - CBR1000F
    #4
    Senior Member darwinpayne2000's Avatar
    Join Date
    Jan 2010
    Location
    American Fork, UT 90 minutes from the sand
    Posts
    699
    Default
    We'd love to see what you can do with the Mazda gear. Some folks on the forum have come up with ideas that worked out really well and other users have "borrowed" it. That's what the forum is all about.
    Reply With Quote
     

  5. Collapse Details
    Re: Barracuda - Superlite - CBR1000F
    #5
    Junior Member
    Join Date
    May 2017
    Location
    Southern Highlands NSW Australia
    Posts
    6
    Default
    Hi DP2000, I hoping to use the Mx5 front uprights , hubs , rotors & calipers using the Edge Barracuda a arms & the Edge CV2 housing & cassette & a arms , getting the Mx5 axles / CV's to fit, also the Mx5 rear uprights , hubs, rotors & calipers. Hoping to make it more robust.

    Will try to focus on the front end first, getting the set up correct Ackerman , bump steer etc, I once had a Chinese single seat buggy with an FZR 600 motor it went like a scalded cat in a straight line & steered like a shopping trolley. (trying to avoid that again ).

    Have been watching lots of You Tube clips of Barracuda builds from all over the world, while I'm no Qualified Engineer or mechanic I have seen guys build Cuda with stick welders , hacksaws and a pair of multi grips, so I'm feeling pretty confident.

    Will be sending some DX files off to the local Laser cutter next week to get the ball rolling.

    All good here !

    cheers
    Chris

    p.s Here was my last build that was written off in a crash....https://vimeo.com/user12687173
    Reply With Quote
     

  6. Collapse Details
    Re: Barracuda - Superlite - CBR1000F
    #6
    Junior Member
    Join Date
    May 2017
    Location
    Southern Highlands NSW Australia
    Posts
    6
    Default
    G'Day everyone, Just waiting for my laser cut parts to arrive ( lots of pieces & 4 x 60T sprockets ) & steel tube, RHS 30 x 30 , RHS 25 x 25 , 30x 5mm FLAT BAR , 40 x 5mm FLAT BAR delivery ( this week ), parts that have recently arrived .... inline e brake & master cylinder , led spot lights , quick release steering hub , SAAS steering wheel , MX5 / Miata front & rear hubs / uprights. Picking up two sets of Racing Fear 15 inch alloys, ( 15 x 5.5 & 15 x 6.5 ) 1 set of rims with Rally style rubber & the other with 50 series road tyres.

    Will post photos soon.
    Last edited by Superlite; 10-17-2017 at 07:31 AM. Reason: photos
    Reply With Quote
     

Similar Threads

  1. Aussie 2seat Superlite
    By kieran in forum Projects in Progress
    Replies: 7
    Last Post: 10-26-2016, 10:57 AM
  2. CBR1000F ST4 Build
    By Moriority in forum ST4
    Replies: 12
    Last Post: 02-21-2016, 01:27 PM
  3. GTR650R Superlite Test Run video 20 July 2012
    By RDRacing647 in forum Projects in Progress
    Replies: 8
    Last Post: 07-27-2012, 11:42 PM
  4. Pics of my Stadium SuperLite
    By JDAWG in forum Show off your toys in here!
    Replies: 6
    Last Post: 04-09-2008, 09:25 PM
  5. New Superlite Class
    By Dunerunner in forum MiniBuggy.net Lounge!
    Replies: 8
    Last Post: 02-28-2008, 12:28 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •