- looking for 9x9 rims
- SAE Mini-Baja
- Resources and tips on designing hubs?
- shock size?
- bushings?
- What tires are good?
- What turning radius can you get from high misalignment spacers?
- New to building buggies and I need some help with suspension but mainly spindles
- 400 ex shocks
- donor atv...
- 14" travel king shocks I need spring rates? help please! lol
- Bushings/ front suspension?
- How much rake?.
- wheel question
- Pinto or Mustang II snout, stub or spud
- Tires
- Where to buy- LONG tie rods?
- forks as shocks?
- Fl 350 &400 Wheels Andbackspace
- 12" 4x100 Wheels
- ground clearance question
- Hard to find fasteners...
- Center carrier pics wanted
- Who makes high misalignment ball joints?
- Heims or bushings
- Badland ST4 Questions
- Badland Buggy ST2 Long Travel Suspension brain storming.
- Heavy Duty Buggy suspension, front & rear w/ cv's
- Branch off- Automotive Air Shocks
- Dual shock valving
- heim joint question
- shock question
- Fox’s new 2.0 Piggyback RC2s shocks.
- 400 mm travel
- MLmotorsports? heim & rod ends
- Benefit of Bypass Shocks
- Quick spindle question
- Fox Air Shox 2.0 vs. King Shocks
- What size rod ends?
- King Shock Tuning
- King Shock tuning
- Cantilever suspension
- cant find wheels? WTF?
- In need of custom front rotors - who's doing them?
- heim or bushings for the front a-arms
- Looking For 2.0 Fox Air Shock
- How paddle tires are measured, ideas?
- experience needed
- Trailing Arm Build
- Fox AIR 2.0
- Understanding Ackerman
- Anti-roll bars on long travel suspension...
- a arm mounting points
- Boxed Trailing arm thickness??
- Wheel and tyre size
- Optimum wheel width to prevent loosing tire bead while sliding in corners
- Suspension Questions
- trailing arms
- Suitable driveshaft//cv ride angle
- custom heel pattern
- Rear A-arm caster/trail?
- need valving advice
- Solid Axle Vs. Independent Suspension
- 3 link question
- Nitrogen or Argon for shock refill?
- Shock length, is longer better?
- What size air shocks do you think I should run.....
- 5lug rims for 26-12stu's
- Steering angle for turning
- im a Noob. Help me out?
- Relationship between RC and CG
- Trailing Arms Vs Duel A-arms?
- motorcycle swing arm question
- ST2 Front A-Arm Jig
- shock shaft 5/8 vs 7/8 coil over
- Douglas rims ??
- Valving Poll (high speed video link enclosed)
- Not re-inventing the wheel
- A-Arms vs Leading likn advantages vs disadvantages
- Coil over airs worth it?
- How do you pull fox air shocks apart?
- tuning shocks
- Plans for hubs, axles, and spindles?
- Cv Axle Vw Golf
- swing arm/snout
- VW Wide 5 Wheels
- limiting compression on fox 2.0
- Shock mounting: upper or lower control arm?
- Making my own hubs, axle, spindle
- want to build a mini out of a 4x4 atv, any body done this
- Spindle Design
- arms plans
- Need micro stub: ATV stub to 930 CV
- Fox Shock pressure..... what p.s.i ???
- tires from Brazil
- Anyone in the Pacific NW know of a good shop tht dynos shocks?
- ATV spindle ball joints
- Front "A" arm angle
- Making hubs, axles, spindles - I need help
- King Question
- Independent or swing arm?
- Best street suspension
- Newb caster/camber questions
- rear hub bearing carrier
- 05 trx 450r into a offroad kart/mini buggy
- Spindle Help
- Piranha Suspension Hyperthetical Question
- CV joints. . .max angularity???
- fox shocks
- Want some opinions: 5 Link vs A-arm vs Trailing arm
- Chromoly A-arms
- Simple hub question
- Can I get a visual aid on what "5 link" means?
- Shock relocation
- Brake and hub kit for R82
- Is it worth the effort?
- Why are axles tapered?
- Rod ends used in a arms and spindles help?
- rear end for piranha
- steering parts
- Stock ATV rim offset?
- What to use for Rack and Pinion?
- Budget spindle options
- finding the right tires...
- Full Hydraulic Steering?
- Redline revolt "X".... WTF?
- single or double A-arms
- Rear Suspension ?
- Motorbike forks for rear buggy shocks
- help with steering
- A-arm mounts
- A-arm lengths and mounting points help
- A dumb Noob question
- What spring rates are you guys running???
- SAE Baja Buggy Spring Rate selection???
- Where can I get some wheels?
- Brake supplier
- IRS Rear Wheel Bearing Dimensions
- Another Trailing Arm Question
- front sand tire choices?
- Dirt Bike Tires
- Wanted!! 12" beadlock rims F&R 4/4 bolt patttern
- Advice on shocks please.
- shock oil
- saggy rear end.
- Stub axle confusion
- Making shocks
- Building trailing arms
- Don't use this style of heim...
- front brake options
- microstub vs. midboard
- atv/sidebyside a-arms?
- a-arms
- Buggy build tips?
- tires rims and hubs
- what type of shock would be best
- What size Tires???
- Is this a good deal
- Double Dirt bike Tires on a Cuda???
- Snowmobill suspension???
- Jackshaft disc brake viability?
- Front Track Width vs. Rear track width ratio. . .for turning radius???
- Anybody ever done a front I-beam buggy on here???
- Suspension parts.
- spindle design
- the best tire for the job
- finding offroad shocks
- a arms?
- DIY beadlocks
- Xtc ball joints
- suspension calculator?
- Mini Rail Width Vs Wheel Base
- Trailing Arms
- Swept back axles???
- Wheel Travel
- axle question
- Need advise setting up shocks
- help with trailing arms
- combo spindles (kit)
- Shocks
- PIRCV Reviews
- front\rear suspension
- 12'' wheel and hub combo?
- Shock location question
- Fox shock help??
- Swingarm pivot points off center
- midify atv a-arm
- Buggy Suspension??
- fox air shox
- Wilwood Brakes
- brakes and knuckle identification
- Joyner sand tire?
- need advice on rear suspesions set up newb
- 1 shock per wheel or 2?
- ball joint help
- 14" tire & wheel
- advise on upgrades
- Paddle Tires
- Dimensions for combo spindle snouts ????
- rear a arm ?
- Rear brake caliper location/orientation quesiton
- 5x115 Bolt Pattern
- ballistic shocks
- outer hubs
- front and rear susp
- Experience with shock bump stops?
- quad susp raptor vs. trx?
- QA1 Adventure Series Shocks
- Front and rear suspension build
- Chain driven trailing arms
- 9"x9" rims PCD 108mm
- trailing arm help
- A-arm frame location
- making trailing arms
- Rear Trailing arm Off-set?
- Sick Sand Car Rear Suspension??????????
- Setting Up Rear Trailing Arms
- Seeking A Frame Set
- A Arm bushings or bearings?
- Do I need heavier springs
- Wheel offset diffrence?
- A-Arm question.
- sway-a-ways vs. fox shocks
- Attention Bullnerd!!!
- newb trailing arm question?
- spindles
- Creative Question?
- Need spindle and Trailing arms fabbed?? Help??
- Rear axle hubs - help
- DIY beadlocks?
- probably a stupid question
- Air? Coil? undecided...
- Front suspension help please!
- Quick question about trailing arms
- Bump Steer Question?
- Front Spindle/Hub Dimensions
- trailing arms vs a arms
- I need brake/hub kits for my R82
- SST Front Brake Questions
- Who sells Douglas Red Label rims?
- Shock length
- rotor and wheel sizes
- Longer travel of ebay schoks?
- heim joints
- shock mounting on Sabertooth
- Non-Coilover vs Air Shocks what's the differens?
- spring rate??
- Who makes the best buggie wheels?
- 5 Link links that will spring back!
- Bead lock rims or kit