Quote:
|
Originally Posted by bugpac
that was a roller bearing cant remember the numbers but the price changed my mind in a big hurry, is there room to redrill the holes in a 930, so the od could be turned to 100 mm? just a thought i know 100 mm bearings are approx 180-250 depends on were you go...
|
I have a 930 CV outer sitting here beside me.
No room at all for redrilling - I thought that might be a good idea. There's only .070" wall thickness between the bolt holes and the OD, so that won't work. The bolt pattern places each bolt between each of the ball's lands with about .130" clearance.
Do you recall the dimensions on the bearings you're talking about? ID of 4.25 with an OD of???
Most of the tapered roller bearings I've found are 6.25 or larger OD. I can live with a 6" OD, but I'd really like to find one that's closer to 5.25 to 5.5.
I can find low profile precision ball bearings, but the tapered bearing is elusive.
