You know what, I think the tip over switch might be the answer to your prayers. Find out what ohm resistor you need and make a little plug with the resitor in it that plugs into the harness. Something like the little chips that cars use, you have to plug in the little chip to start the car. Here's the deal, anyone can hotwire a streetbike motor. You guys that are taking the sidestand switch and running a key on it are wasting your time. All you need is a pair of wire cutters to cut the 2 wires going to the ignition key and twist them together. By using a little plug with the resistor in it and a deep socket for the wires to touch, how many people are gonna have a correct ohm resistor on them to plug into the circuit to make it run? It's basically a chip key. It is prob. the best antitheft device you can have and you can make as many as you want for backups. Don't make it somewhere obvious and don't tell people where you put it. You only need to take it out when you won't be driving for a while, or you can leave it in all the time........
|