Re: 05 trx 450r into a offroad kart/mini buggy
I am currently converting a yamaha blaster into a little buggy for my kids, loook under "projects" it is under FX-10. the only problem is the lenght of the frame if you possision the motor behind you and use the swingarm, I am going to mount my motor above the swingarm and run a chain to a pivot point just in front of the swingarm so it will work like on the quad. The other problem is the width is kinda set by the width of the rear axle. In the picture of mine I used the front of the quad however if i was making it for me, I would just take the a arms off and bolt them on to the outside of my frame, kinda like pilots are done, it would effectivley widen my frame by 22 inches in the front, the back all you can do is get wheel spacers.
|