Here's the shroud I've come up with for mounting the Civic radiator fans.
This shroud will fit the aftermarket Civic aluminum radiators sold on Ebay.
This is the dual core 16.5" x 14.25" x 2" with 12" fan.
It can be mounted on either side of the rad.
I only made 3 and these are all spoken for. I will make more if there is any interest. I also make the rubber isolator bushings for these radiators.
Civic 92-00 2 Row Aluminum Radiator+12" Fan EG EK MT DX:eBay Motors (item 200371285783 end time Nov-05-09 12:26:24 PST)
There's approx. 15/16" clearance between the coling fins and the fan's base.
It also has an edge seal along the top and bottom.
I drill the side plates and add #10-32 threaded A-T insert nuts for mounting. This must be done very carefully. you can easily puncture the core if you drill too deep.
