Re: A-arm mounts
If you have access to a lathe, working w/Delrin's easy.
It does make a horrid mess and tend to make very long, tough stringers when you machine it, though.
Make sure that the crush sleeve's at least .015" or so longer than the installed Delrin bushings. You want the bolts that hold the suspension on to clamp down on the sleeve and not the bushing. A little extra length on the sleeve will assure that you don't pinch down on the bushings, hindering motion.
__________________
Yellow Dog Racing
If it wasn't for Physics and the Ground, I'd be Unstoppable!
Youth and Talent are No Match for Age and Treachery! 
Last edited by K-fab; 10-09-2009 at 02:18 PM.
|