Hi guys,
I've been calling all over the place trying to find a supplier for my chassis/suspension component tubing. The problem is, as soon as you start talking millimeters nobody knows what the hell you're talking about (go figure)- I'm looking for the closest North American equivalent to the following (taken from my Barracuda plans)
25NB x 2.6 Pipe - 23000mm DOM
20NB x 2.3 Pipe - 28000mm Chromoly
The confusing part is the "NB-Nominal Bore"- it implies that measurement is the inside diameter, my suppliers need to know what the outside diameter of this pipe is...in inches
I'm assuming the 2.6 is referring to the wall thickness, correct me if I'm wrong.
Thanks in advance fellas,
Vernon