[buggito]

Nice job start to look like mine ;0).

Where did you get the flange for the bearing and what size are they ?

Thanks,


I don't know how powerful is your motor but try to keep the shaft as short as you can , if you can go with a 1 1/4 it make a huge dif. between 1" and 1 1/4", I shear the key way at my first out, other tips insure the sprocket is a Very tight fit and set screw are tight, use Whitlock Medium, if you use the Hight strength you may not be able to remove them.

I just bent two 1/8 wrench to have them out.