Ya I hear that. Move that sucker down. Keep us posted if you get it.
And I hear ya on the sponsors. Very true. Thanks again.
We set up the entire suspension and had everything on.
Then we sat in it and pushed up and down on the back
it sagged a little to much. We only had maybe 10 inches of
ground clearance. Dang.
I have to take everything back apart today and crank up
the torsions more. Mike and I were afraid of going to stiff
at first and so I did not go enough. I will go another click
on the torsion and that should do it.
To bad I have to take all the rear suspension etc apart
just to do that. Its an easy half day job.
Oh well we learned and now we know.
Ya not ready for driving until this weekend.
Couple small things we still need to do. Gear oil in the
tranny, battery and at least some form of wiring.
Mike and John sat inside to figure out how they wanted the inside
stuff like tool kits, fire ext. etc. set up.
Here are a couple camera phone pics of them checking out how much air the air
breathers put out.
:lol:
