Quote:
Originally Posted by elmariachi
haapc,
I can understand your eagerness to jump into this sport, but I don't think members here will give away plans produced by some of the designers yoshi has listed. The plans listed by yoshi are ones people on this board have found some success with building and/or are nicely detailed --my suggestion is if you are serious is to go with a set of plans from Rorty; very detailed and Rorty is always an email away if you should have a question or concern (as are many good people on this board). I don't know what your mechanical skills are, but these plans are not assembly instruction and require some technical and or artistic skill (not that I would posses either). You'll at a minimum need to know some welding and tube bending as well as some fabrication skills (or have access to someone who does). Ask lots of question here and do searches for anything that you might have a question about (it’s probably been asked and answered before in some detail)
Welcome to MBN!!! |
I didn't get the impression he was looking for free plans, just info on where to get them...