Re: First time mini rail builders
Hi everybody.
I have finalized the front suspension I believe. *What I did to get rid of some of my bumpsteer is I moved the center of my spindle down on the king pin shaft (I hope that makes sense) and moved the top shock mounts up. *By doing this I decreased how far my suspension goes downat full release, and increased the height it goes to at full compresion, while keeping the same ride hieght and full compression clearence. This has decreased the amount of camber change I have to go through as my suspension is not going to as extreme angles. *Now with less camber change I have much less bumpsteer. *Between 1/16 and 1/8 per side. *I also painted up the frame in solidworks to make it look way more dope, and added a concept (Far from actual design) back end. *I will attach pictures. *Hope you guys like it.
Grant
|