Re: Driven CVT Clutch to Gearbox Mating
Yeah, buying a polaris secondary is a possibility; we were also thinking ofpulling out the input shaft and trying to turn the splines down smooth, make an adapter, and weld it up; not sure if we could do this without damaging the saft. *The only non-invasing thing I can think of would be having our secondary running on its own shaft, supported by two bearings, and some sort of coupling from that shaft to the splined input of the gearbox. *I'll probably get with our machine shop guy and get his opinion too. *I think this is goign to be the biggest hurdle with our design.
|