Quote:
Originally Posted by cbr929_build_up\";p=\"
alright. *First of all thanx for the posts. *I decided to go down and buy a 1 ohm resistor. *I put the resistor between the power wire coming to the ignition switch and the pink wire for the anti-theft. *I then bypassed the bank angle sensor by tying the outer red and green wires together. *Do i need resistors to byspass the angle sensor? *I still have no spark. *Any ideas?
|
Your post says you got a
1 ohm resistor. *Is that a typo? *If not you need a
1 k ohm one. *Check the voltage between the resistor and the ECU. *The ECU is looking for more than 3.5 volts but less than 10 volts. *If it sees to little or too much it won't allow spark or fuel. *Also on my GSXR's you can't just bypass the bank angle sensor, you have to add some resistance to the circuit. *I am not sure if the Honda engines are the same but brandon may know from first hand experience.