[Damien]

all of the A-arms and jigs are out to qute with the laser cutters, so they should be all mounted up in a few weeks. *The rear suspension has about 30% anti squat with about 4in. of wheel recession. *Both arms are at the same angle as the front lower. *I kept the plunge to less than .5 in. but I need about 40 degrees of cv articulation so I'm going to try non plunging cv's with 930 pattern and a regular coated splined slip joint. *I'm hopeing since I have little plunge I wont need ball splines, but if stiction is governing the axial force then ?