View Single Post
Old 07-04-2007, 06:26 AM   #9 (permalink)
TutTech

Super Moderator
 
TutTech's Avatar
 
Join Date: Apr 2007
Location: Mojave Desert, CA.
Posts: 1,722



Send a message via Yahoo to TutTech Send a message via Skype™ to TutTech
Default Re: Input Wanted for my next build.

Hmm a Thing but a buggy Thing would be funny.
And yes you are right that would draw alot of attention.

I will think on this further.
Thanks.



What do I have on my engine?
My current race motor is actually an after market block.
Complete copy of a VW motor but alot larger.
Its very big but very strong because it is not bored over or
stressed to get the power out of it because I bought it at the
current size its at.
Like building a big 2300 motor this comes stock at that size.
Then a cam, big crank, big heads, porting, good pistons, rods, bearings, electric points, big carb and some race fuel and I can actually stroke it some more and go well over 200 horse. But I kept it at 9.5 to 1 compression and I am getting just around 180 horse.
And its very reliable.
I have ran this motor since last year and not even taken it in for a rebuild
yet.. Oil change, valve job and off and racing.

Thanks again everyone.
Hmm I am thinking of copying this car at this time as it is prooven and
works well.
I have used some of the larger car specs and brought them to a smaller
car and its working.
So now to do the same but with a play car I think is in order.

__________________

Tut Tech Racing
TutTech is offline   Reply With Quote